Summer 2015 Metrology and Instrumentation Question Paper

************

GUJARAT TECHNOLOGICAL UNIVERSITY
Diploma Engineering - SEMESTER–IV • EXAMINATION – SUMMER • 2015
Subject Code: 3341905 Date: 15-05-2015
Subject Name: Metrology and Instrumentation
Time: 10:30 am - 01:00 pm Total Marks: 70

Instructions:
1. Attempt all questions.
2. Make suitable assumptions wherever necessary.
3. Figures to the right indicate full marks.
4. English version is considered to be Authentic.

************

Q.1 Answer any seven out of ten. 14

1. Name the parts of vernier caliper.

2. Why wringing is required?

3. Find the least of the vernier with minimum of 0.5mm on main scale and 50
vernier divisions.

4. Define straightness.

5. What is the use of Talysurf Tester?

6. State the full form i)CLA ii)RMS

7. Name the 2 methods to measure gear tooth thickness.

8. State the elements of external thread.

9. Name 4 limit gauges.

10. Name 4 temperature measuring devices.

Q.2 (a) List the linear measuring instruments and define quality control. 03

OR

(a) Differentiate accuracy and precision 03

(b) What is least count? How to find the least count of height gauge? 03

OR

(b) Write the uses of surface plate. 03

(c) Draw the labeled diagram of vernier calliper 04

OR

(c) Draw the labeled diagram of micrometer. 04

(d) Draw the diagram of slip gauge indicating 50mm and active faces Write the
uses of slip gauges. 04

OR

(d) Draw the labeled of bevel protactor. 04

Q.3 (a) Draw the symbol of surface roughness with complete detail 03

OR

(a) Draw symbol of i)Roundness ii)Parallelity iii)Perpendicularity 03

(b) State the advantages of non destructive testing. 03

OR

(b) Name the NDT methods. 03

(c) Explain with diagram roundness measurement. 04

OR

(c) Explain the working of dial indicator with diagram 04

(d) Explain dye penetration method of testing. 04

OR

(d) Explain the working of sine bar with diagram. 04

Q.4 (a) List the types of gear and explain module 03

OR

(a) Name 4 pressure measuring device and draw diagram of ‘U’ tube manometer. 03

(b) Explain the working of bellow type flow meter. 04

OR

(b) State the advantages and disadvantages of limit gauge. 04

(c) Explain the measurement gear tooth thickness with diagram 07

Q.5 (a) Explain the measurement of major diameter of bolt. 04

(b) Explain the working of thermocouple 04

(c) Name the various types of transducers 03

(d) Explain plug gauge with the help of diagram 03

************

Summer 2014 Metrology and Instrumentation Question Paper

*************

GUJARAT TECHNOLOGICAL UNIVERSITY
Diploma Engineering - SEMESTER–IV • EXAMINATION – SUMMER • 2014
Subject Code: 3341905 Date: 03-06-2014
Subject Name: Metrology and Instrumentation
Time: 10:30 am - 01:00 pm Total Marks: 70

Instructions:
1. Attempt all questions.
2. Make suitable assumptions wherever necessary.
3. Figures to the right indicate full marks.
4. English version is considered to be Authentic.

************

Q.1 (a) With the help of a neat sketch, explain the working principle of outside
micrometer and show 26.65 mm on it. 07

(b) Write a short note on Optical Bevel Protractor and find appropriate angle
gauges to produce 23º49‟24‟. 07

Q.2 (a) Describe the working principle of “Tombilson surface meter”. 07

(b) Explain the method to check roundness of a shaft with the help of "V" block
and dial indicator. 07

OR

(b) Define straightness and describe the indicator and autocollimator method to
measure it. 07

Q.3 (a) Explain the methods to measure the effective diameter of a screw thread. 07

(b) Define the following (1) Addendum( 2) Dedendum (3) Circular pitch
(4) Thickness of tooth (5) Diametral pitch (6) Module (7) Pitch Circle Diameter. 07

OR

Q.3 (a) Write a short note on Gear Tooth Vernier Calliper. 07

(b) Define the following as related to screw thread: 1) Major diameter 2) Minor
diameter 3) Effective diameter 4) Pitch 5) Lead 6) Helix angle 7) Flank 07

Q.4 (a) What are limit gauges?State their advantages and disadvantages. 07

(b) Describe any one method of Non-Destructive Testing in detail. 07

OR

Q. 4 (a) What are “GO” and “NOT GO” members of limit gauges.?Sketch a plug
gauge and explain them. 07

(b) State the advantages and limitations of Non-Destructive Testing. 07

Q.5 (a) Differentiate between resistance thermometer and thermocouple. 07

(b) Classify the pressure measuring devices and list the different transducers to
measure pressure. 07

OR

Q.5 (a) With the help of a neat sketch, explain Bellow type pressure gauge. 07

(b) Classify the different flow measuring devices and list the different transducers
to measure flow. 07

************

Winter 2015 Metrology and Intsrumentation Question Paper

************

GUJARAT TECHNOLOGICAL UNIVERSITY
DIPLOMA ENGINEERING – SEMESTER – IV-EXAMINATION – WINTER 2015
Subject Code: 3341905 Date: 09/12/2015
Subject Name: Metrology & Instrumentation
Time: 02:30 PM TO 5:00 PM Total Marks: 70

Instructions:
1. Attempt all questions.
2. Make Suitable assumptions wherever necessary.
3. Figures to the right indicate full marks.
4. Use of programmable & Communication aids are strictly prohibited.
5. Use of only simple calculator is permitted in Mathematics.
6. English version is authentic.

************

Q.1 Answer any seven out of ten. 14

1. Define: (1) Metrology (2) Inspection

2. State name of direct measuring instruments.

3. Define : Flatness

4. What is CLA value.

5. Define : Pitch of thread.

6. Define: Module.

7. Write advantages of LVDT.

8. State why calibration is necessary?

9. State application of Thermometer.

10. Differentiate between Accuracy and Precision.

Q.2 (a) Explain the functions of inspection. 03

OR

(a) Explain the need of end standard. 03

(b) Write short note on Non destructive testing ( NDT ). 03

OR

(b) Explain in brief interchangeability and selective assembly. 03

(c) Draw neat sketch of height gauge. 04

OR

(c) Draw neat sketch of gear tooth vernier. 04

(d) Explain principle and working of height gauge. 04

OR

(d) Explain principle and working of gear tooth vernier. 04

Q.3 (a) Explain in brief any one straightness measuring method. 03

OR

(a) Explain in brief any one flatness measuring method. 03

(b) Draw neat sketch of screw thread and label its elements. 03

OR

(b) Explain working principle of stylus instruments. 03

(c) How angle is measured with help of sine bar. 04

OR

(c) Explain the wringing process for joining slip gauge. 04

(d) Select most appropriate slip gauges from M-112/1 set for following
dimensions. (1) 34.4785 (2) 72.985 04

OR

(d) Explain working and application of angle dekkar. 04

Q.4 (a) Write short note on calibration of vernier caliper. 03

OR

(a) Write short note on dial indicator 03

(b) Describe Three wire method for measuring an effective diameter of thread. 04

OR

(b) Explain Parkinson’s gear tester. 04

(c) Explain the working principle of radiation pyrometer with neat sketch. 07

Q.5 (a) Write short note on dead weight piston gauge. 04

(b) Write short note on capacitance type transducer. 04

(c) Write short note on rotameter. 03

(d) Name different limit gauges, state their applications. 03

************

Winter 2016 Metrology and Instrumentation Question Paper

************

GUJARAT TECHNOLOGICAL UNIVERSITY
DIPLOMA ENGINEERING - SEMESTER–IV • EXAMINATION – WINTER - 2016
Subject Code: 3341905 Date: 28- 11-2016
Subject Name: Metrology and Instrumentation
Time: 02:30 PM TO 05:00 PM Total Marks: 70

Instructions:
1. Attempt all questions.
2. Make Suitable assumptions wherever necessary.
3. Figures to the right indicate full marks.
4. Use of programmable & Communication aids are strictly prohibited.
5. Use of only simple calculator is permitted in Mathematics.
6. English version is authentic.

************

Q.1 Answer any seven out of ten.  14

1. Write the functions of Telescopic gauge?

2. What is wringing process?

3. Find the least count of the vernier with minimum of 0.5mm on main scale and
50 vernier divisions.

4. Define Roundness.

5. What is the use of Talysurf Tester?

6. State the full form i)CLA ii)RMS

7. Name the 2 methods for measure Gear tooth profile.

8. List the elements of internal Gear.

9. Name 4 limit gauges.

10. Name 4 pressure measuring devices.

Q.2 (a) List the linear measuring instruments with its Least count. 03

OR

(a) Differentiate the Centralized & Decentralized inspection. 03

(b) What is least count? How to find the least count of micrometer? 03

OR

(b) Write the uses of Slip gauges. 03

(c) Draw the labeled diagram of vernier calliper. 04

OR

(c) Draw the labeled diagram of vernier height gauge. 04

(d) Write the working principle of outside micrometer and show 25.15 mm On it. 04

OR

(d) Draw the labeled of bevel protactor. 04

Q.3 (a) Draw the symbol of surface roughness with complete detail. 03

OR

(a) Draw symbol of i)Roundness ii)Parallelity iii)Perpendicularity. 03

(b) State the advantages of non destructive testing. 03

OR

(b) Name the NDT methods. 03

(c) Explain with diagram roundness measurement. 04

OR

(c) Explain the working of dial indicator with diagram. 04

(d) Explain the Calibration of instrumentations. 04

OR

(d) Explain the working of sine bar with diagram. 04

Q.4 (a) List the types of gear and explain module. 03

OR

(a) Name 4 pressure measuring device and draw diagram of pitot tube. 03

(b) Explain the working of Bourdon tube pressure gauge. 04

OR

(b) What is comparator? Classify the Comparators. 04

(c) Explain with neat sketch “Gear tooth Vernier caliper”. 07

Q.5 (a) Explain the best wire size for thread measurements. 04

(b) Explain the principle of thermocouple. 04

(c) Name the various types of transducers. 03

(d) Explain plug gauge with the help of diagram. 03

************

Summer 2016 Metrology and Instrumentation Question Paper

************

GUJARAT TECHNOLOGICAL UNIVERSITY
DIPLOMA ENGINEERING – SEMESTER – IV • EXAMINATION – SUMMER- 2016
Subject Code: 3341905 Date: 24-05 - 2016
Subject Name: Metrology & Instrumentation
Time: 10:30 AM TO 01:00 PM Total Marks: 70

Instructions:
1. Attempt all questions.
2. Make Suitable assumptions wherever necessary.
3. Figures to the right indicate full marks.
4. Use of programmable & Communication aids are strictly prohibited.
5. Use of only simple calculator is permitted in Mathematics.
6. English version is authentic.

                                                                   ************

Q.1 Answer any seven out of ten. 14

1. Classify linear measuring instrument.
.
2. State application of slip gauge.

3. State direct and indirect angular measuring instrument.

4. State application of spirit level.

5. Differentiate between roughness and waviness.

6. State name of errors in screw thread.

7. Define addendum and module.

8. State name of various types of limit gauges.

9. Define threshold and accuracy.

10. Differentiate between active and passive transducers.

Q.2 (a) Explain the functions of inspection. 03

OR

(a) Write short note on Wringing process of slip gauges. 03

(b) Explain the working principle of auto collimator. 03

OR

(b) Draw neat sketch of optical clinometers. 03

(c) Draw neat sketch of height gauge. 04

OR

(c) Draw a neat sketch of Parkinson’s gear tester 04

(d) Explain working principle of Height gauge. 04

OR

(d) Explain working principle of Parkinson’s gear tester. 04

Q.3 (a) Explain wedge method of measuring straightness. 03

OR

(a) Define the following terms.
1. CLA value 2. RMS value 3. Mean line. 03

(b) Explain any one method of measuring flatness. 03

OR

(b) Define best wire size. State its mathematical relation. 03

(c) Show the important elements of spur gear with a neat sketch. 04

OR

(c) Explain ‘V’ Block and dial indicator method of roundness testing. 04

(d) Draw a neat sketch of screw thread and list its main elements of
measurement. 04

OR

(d) Explain the working principle of sine bar with neat sketch. 04

Q.4 (a) Explain working principle of capacitance type transducer. 03

OR

(a) Explain working principle of pressure capsule. 03

(b) Describe any one method of Non-Destructive Testing. 04

OR

(b) What are limit gauges? State their advantages and disadvantages. 04

(c) Explain working principle of optical pyrometer with the help of figure. Also
state the advantages of pyrometer. 07

Q.5 (a) Draw the circuit diagram of resistance thermometer. Explain its principle
and working. 04

(b) Describe working principle of rotameter. 04

(c) Write short notes on snap Gauge. 03

(d) Write short note on inclined manometer. 03

************

Metrology & Instrumentation previous year question paper | 3341905 |

What advantage can you take with gtu previos Exam Papers?

Exams appear to be a mystery to most students but some may find it exciting by looking at it as a competition. They pray about having a perfect dream about the coming test so that they already know it but that is not a reality truth is if you wants to succeed you have to prepare well for the exams.

Studying past papers are a valuable part of exam preparation and help keep revision focused on important themes whilst practicing exam style questions.

One of the simplest ways to prepare for the exams is to manage your study according to a well-defined time table and allot time to every subject. It is a good practice to compare the questions of the examiners because it will give a better idea about what the examiner is looking for in the exam.

 Technique for Studying gtu previos Exam Papers

Most of the universities keep copies of the past exams in their libraries or they can also be accessed from the university websites available on the internet. A good practice is to take past five year papers and, instead of going through the past exam paper year by year, find questions about the same topic and prepare that topic really well. This technique can be very helpful for preparing the exam.

Advantages of Studying gtu previos Exam Papers

One of the most important part of exam preparation is going through past exams. It is important  to revise your entire syllabus quickly. They can provide you the general idea of the upcoming paper and you could easily guess the important topics of a particular subject. Past exam papers give you the idea of number of questions and the available choices. It is therefore necessary for students to give some time to go through the past paper while revising a subject.

Past exam papers are one of the most helpful tools available to prepare for both internal and external examinations as they provides students with practical insight into how the forthcoming exam paper is likely to look and the key themes or subject areas most likely to be covered. Before starting revision for a subject it is always worth taking time to seek out past papers.